Electric cutouts`

[mattyacks]

are there such things?. if so where can i buy one

[3.8Fury]

Re: Electric cutouts`

yes there r such things as electric cutouts. I want to do it to my car 2, just not sure where I can buy 1...

[cam98aro]

Re: Electric cutouts`

jegs and summit have them.

they cost around $450 IIRC

[3.8Fury]

Re: Electric cutouts`

Thanks for the info man....

[F-Body_SS-Man]

Re: Electric cutouts`

Bought mine for $90.

[xmetallicaxguitaristx]

Re: Electric cutouts`

Lol funny, I was just thinking about this today..

Thing is most of the electric cutouts I can find don't include the Y-pipe you need and most are just about $200.

I really want to do an electric cutout but it seems really expensive.

[eric v6]

Re: Electric cutouts`

ebay my friend they are everywhere for about 145 shipped

[mattyacks]

Re: Electric cutouts`

its nice to see other people wanted to do this as well, i felt like an idiot

[newage1928]

Re: Electric cutouts`

electric cutouts are great... they let out the inner grrrr of your car!

[Smoke Panther]

Re: Electric cutouts`

are there such things?. if so where can i buy one

http://motors.search.ebay.com/QTP_W0QQfromZR40

[StrtRacer98]

Re: Electric cutouts`

This belongs in the exhaust section, moving...

[Taheen]

Re: Electric cutouts`

I've been thinking about using an electric cutout before the over-the-axle pipe on my stock exhuast setup. I work in the AM (have to be there at 5) so the quiet stock sound is ok for me. (although the look of dual tips would be nice)

But other than having to make that drive that early in the morning sometimes I want to open it up a little louder, give it some depth. Think I may do this... I would need a 2.5" cutout right or is the stock 2.25"? Whats the opinion on clamping instead of welding? Eventually it'd be nice to get a catback, nothing extreme probably the Flowmaster 2.5" so I could carry this over and it'd be nice not to have to cut the welds on it.

[Smoke Panther]

Re: Electric cutouts`

I would need a 2.5" cutout right or is the stock 2.25"? Whats the opinion on clamping instead of welding? Eventually it'd be nice to get a catback, nothing extreme probably the Flowmaster 2.5" so I could carry this over and it'd be nice not to have to cut the welds on it.

depends what size piping you currently have...but, IIRC, I don't know of any company that makes a 2.25" cutout. Clamping is a poor substitute for welding.

[xmetallicaxguitaristx]

Re: Electric cutouts`

http://cgi.ebay.com/ebaymotors/Elect...spagenameZWDVW

They have 2.25